Spooky Cat Tails is a beautiful Halloween wall hanging or table mat. You can mix up the blocks for smaller or larger projects, such as mugrugs, tote bags, trick-or-treat bags, placemats, bed runners, table runners, etc.

Two of the quilt blocks require two hoopings each. As you can see from the stitch count, the blocks have a low stitch count and so take very little time to complete, even with the two blocks that require two-hoopings. There are 8 designs included in this set.

Step-by-step directions (with photos), "How to" PDFs, PDFs templates for all of the pieces, SVGs for all pieces except batting pieces (in case you prefer using a die cutter versus scissors). Precutting everything makes the project go quickly and smoothly.

Also, included are "sashing" designs that can be used as borders or bindings, as well. I used the striped design as binding for this project. There are instructions for how to stitch and to apply the bindings to the project.

This is an "In the Hoop" project, but is also a QAYG (quilt as you go) project. Directions are included for construction the project, including the binding.

Formats: DST, EXP, JEF, HUS, PES, VIP, VP3

1550A1-Spooky Cat Tails-2 pc Block

Design size is 1.26 x 1.95 in (32.00 x 49.53mm);

Stitches: 325

1550A2-Spooky Cat Tails-Center Block

Design size is 4.50 x 4.50 in (114.30 x 114.30mm);

Stitches: 3,067

1550B1-Spooky Cat Tails-Left Panel

Design size is 4.50 x 4.50 in (114.30 x 114.30mm);

Stitches: 1,149

1550B2-Spooky Cat Tails-Cat Block

Design size is 4.50 x 4.50 in (114.30 x 114.30mm);

Stitches: 4,056

1550C1-Spooky Cat Tails-Squares-Spider Block

Design size is 4.50 x 4.50 in (114.30 x 114.30mm);

Stitches: 2,433

This is a machine embroidery design and requires an embroidery machine to stitch out the design.

The design is for download only and no physical product will be sent.

© 2023 Lucinda's Embroideries-All Rights Reserved